A Windows POS terminal works normally during the day, but its date and time change after being unplugged. Sometimes the clock goes back to an earlier date. Other times, it loses the time completely after being disconnected from power overnight or for several days.
A weak motherboard battery is one possible cause. Often called the BIOS battery or CMOS battery, it provides backup power for the real-time clock (RTC) when the terminal is disconnected from its main power supply.
However, not every clock problem points to a faulty battery. Windows time settings, synchronization issues and motherboard faults can cause similar symptoms. Before replacing anything, it is worth checking how the clock works and where the problem starts.
1. How Does a POS Terminal Keep Time When Powered Off?
A motherboard in Touchscreen POS Hardware includes a real-time clock (RTC). This small hardware component keeps track of the date and time independently of Windows.
The RTC needs a small amount of power to keep running when the POS terminal is shut down and disconnected from its main power supply. A motherboard battery normally provides this backup power.
The battery is commonly called a BIOS battery or CMOS battery. Its main job is to keep the RTC running. On motherboards with battery-backed CMOS memory, it may also help retain certain hardware configuration settings.
The battery does not store the date and time itself. It simply supplies the power the RTC needs to keep counting.
When the terminal starts, the system firmware initializes the hardware, and Windows reads the system time. If automatic time synchronization is enabled, Windows can then update the clock using an internet time server.
This is why a POS terminal may show the correct time after startup even when its hardware clock has lost time during a power disconnection.
However, Windows synchronization does not fix a failing backup battery. It only corrects the system clock while synchronization is available. If the battery can no longer maintain the RTC, the same problem may return after the next power disconnection.
2. What Are the Common Signs of a Weak BIOS Battery?
A failing battery does not always produce the same symptoms. The timing of the problem can help narrow down the cause.
Date and time reset after unplugging
If the terminal loses both the date and time after being disconnected from power, the battery may no longer be supplying enough backup power to the RTC.
A typical sign is that the clock works normally while the terminal remains connected to power but resets after the power adapter is unplugged.
The clock loses time while disconnected
In some cases, the RTC may lose time gradually rather than resetting completely. How this happens depends on the motherboard and its power design.
BIOS or startup warnings appear
Some systems display messages such as "CMOS Time and Date Not Set" or ask the user to enter BIOS setup after startup.
These messages suggest that the system has lost clock or configuration information. A weak battery is one possible explanation, but it is not the only one.
The time is wrong by several hours
If the date is correct but the displayed time is consistently ahead or behind, check the Windows time zone first.
A wrong time zone or daylight saving time setting can affect the displayed time without any problem with the motherboard battery.
3. How to Check Whether the Problem Is Battery-Related
Before opening a Desktop POS Terminal, check the Windows settings and BIOS clock. These steps can help determine whether the problem comes from the battery or the operating system.
First, check that the Windows time zone matches the terminal's actual location. Then confirm that automatic time synchronization is enabled and that Windows can reach its configured time server.
Next, enter BIOS or UEFI setup, if the model allows access, and check the date and time there.
The results can help identify where to look next:
BIOS clock is incorrect after unplugging: Check the motherboard battery and RTC circuit.
BIOS clock is correct but Windows shows the wrong time: Check the Windows time zone and synchronization settings.
Clock becomes incorrect even while connected to power: Investigate Windows configuration, synchronization problems or possible motherboard faults.
You can also compare the clock before and after disconnecting the external power supply. If the time resets only after the terminal has been completely disconnected from power, the backup power circuit deserves closer attention.
These checks will not confirm a faulty battery on their own, but they can help prevent unnecessary replacement.
4. Check the BIOS Battery Type Before Replacing It
If the symptoms point to a battery problem, check the motherboard specification before buying a replacement.
Some Sunany Windows POS motherboard configurations use a CR2032 battery, a common 3V lithium coin cell. However, the battery type and installation method are not the same across all motherboard models.
There are two common arrangements.
Coin cell in a battery holder
Some motherboards use a standard coin cell fitted into a holder. The battery can usually be released by moving the retaining clip according to the motherboard's service instructions.
Battery with a cable and connector
Other motherboards use a coin cell connected through a short cable and plug. The assembly may also have an insulating cover or be attached to the chassis.
The two arrangements should not be treated as interchangeable. A standard CR2032 battery, for example, is not a direct replacement for every wired battery assembly.
Before ordering a replacement, check:
Battery type and voltage: Read the marking on the original battery and compare it with the motherboard specification.
Physical arrangement: Check whether the battery sits in a holder or connects through a cable.
Connector and polarity: For wired assemblies, confirm the connector, pin arrangement and positive and negative terminals.
Compatible replacement batteries are generally available from electronics stores and battery retailers. You do not necessarily need to purchase one from the POS manufacturer, provided the replacement matches the original specification.
5. What to Check Before Replacing the Battery
Opening an All-in-One POS PC is different from replacing a battery in an ordinary desktop computer. The battery location and access method depend on the internal design.
Before opening the terminal:
Confirm that the battery is replaceable and identify its exact type.
Check the service instructions and warranty conditions.
Shut down the terminal and disconnect its external power supply.
Follow the manufacturer's instructions for accessing the motherboard.
Take appropriate electrostatic discharge (ESD) precautions when handling internal components.
For a coin cell in a holder, check its original orientation before removing it. Install the replacement with the correct polarity.
For a wired battery assembly, use a compatible replacement with the correct connector and wiring arrangement. Do not cut wires, modify connectors or force an incompatible battery into place.
When servicing a Fanless POS Terminal, take care around the internal components and thermal design. Avoid disturbing heatsinks, thermal pads or other parts unless the service instructions require it.
If you are not familiar with motherboard servicing, it is safer to have a qualified technician replace the battery.
6. Verify the Clock After Battery Replacement
A new battery does not automatically mean the problem is fixed. The RTC needs to be tested after replacement.
Reconnect the power supply and start the terminal. Set the correct date and time in BIOS/UEFI or Windows, depending on the system configuration.
Then follow these steps:
Shut down the POS terminal.
Disconnect its external power supply.
Leave it disconnected for a suitable test period.
Reconnect the power supply and start the terminal.
Check whether the date and time are still correct.
If the clock retains its settings, the battery replacement has likely resolved the problem.
If the date is correct but the time is still several hours off, check the Windows time zone and synchronization settings again.
If the clock resets after replacement, check the battery specification, polarity, holder contact or wired connection. If everything is installed correctly, the RTC circuit or motherboard may need further inspection.
A POS clock that resets after unplugging often points to a weak BIOS battery, but it is worth checking the Windows settings and BIOS clock before replacing hardware.
For Sunany POS terminals, the motherboard model and original battery specification are the best starting points. The same checks are useful when maintaining a Commercial POS System, where incorrect system time can affect transaction records and other time-dependent operations.
If the clock continues to reset or you are unsure which battery assembly your terminal uses, contact the Sunany technical support team with the model number and a description of the symptoms.
FAQs
1. How Long Does a POS CMOS Battery Last?
A CMOS battery can last several years, but its lifespan depends on the battery type, motherboard design and operating conditions. There is no fixed replacement interval for every POS terminal. Replace it when the clock or BIOS settings show signs of being lost.
2. Can a POS Terminal Work Without a CMOS Battery?
A POS terminal may still start and run without a working CMOS battery, depending on the motherboard design. However, the RTC may lose its date and time when external power is disconnected. Some BIOS settings may also need to be restored.
3. Will Replacing the CMOS Battery Delete My POS Data?
Replacing the CMOS battery does not normally erase data stored on the SSD or HDD, including Windows and POS application files. However, some BIOS/UEFI settings may return to their default values. It is a good idea to record important settings before replacing the battery.
